Industry News

Early Wear of Brake Pads

Update:13 Dec 2017
Summary:

He replacement of brake pads has always been a focus of […]

He replacement of brake pads has always been a focus of discussion. After all, the most fundamental issue is that it is a matter of life. No one neglects it. In general, brake pads have a fixed replacement to make it, in particular, must also be in accordance with the driving conditions of each vehicle may be. But before you know a little brake replacement knowledge is necessary.

Early brake pads on the owners often reflect the brake wear-resistant, which is actually part of the phenomenon of early wear and tear, causing this early wear and tear are mainly due to the following aspects. Poor quality brake disc or drum material and structure easily lead to brake pads early wear and tear. Due to the long-term use of braking system brake caliper brake damage caused by non-return, making the film and the plate (drum) long-term wear resulting in serious wear and tear.

Unusable brake pad materials used and brake pad friction layer design density is unreasonable (too small), but also lead to brake pad wear one of the reasons. The original car brake pad design area is small, long-term speeding, frequent braking, overload and long-term use of high temperature, but also lead to brake wear and tear of the main reason. For all the above reasons, it is recommended that you use the brake products (0E products), pliers and brake pads that match your car.

Brake brake disc brake thickness can be used to check the brake plate, and drum brake shoe brake pad thickness check, you must brake shoe pulled out from the brake for inspection. However, both the brakes on the disc brakes and the brakes on the drum brakes, the manufacturer specifies a thickness of not less than 1.2 mm because, through all actual measurements, the brakes wear before and after 1.2 mm and Spall faster. Therefore, the owner should check and replace the brakes on the brakes at this time or before. For normal vehicles, under normal driving conditions, the service life of the brakes of the front brake is 3-5000 km and that of the brake brakes of the rear brake is 12- 150,000 kilometers.