The thickness of new lining parts is 14mm, the limited […]
The thickness of new lining parts is 14mm, the limited thickness is 7mm, which include 3mm metal part and around 4mm friction material. Some vehicles with brake shoe alarm function, once the wear limit is reached, the instrument will alarm and prompt to replace the shoe. Although it can be used for a period of time, it will reduce the effect of braking, affecting traffic safety.the brake pad provided by original factory has better braking effect is best, and the least wear.
The brake pad need be checked every 5000 kilometers under normal driving conditions. Not only need to check the remaining thickness, but also check the status of shoe wear. To see whether the degree of wear same or not, whether freely return. If you find abnormal situation must be dealt with immediately
Brake shoe is generally composed of iron shoe part and friction material. It can not replace the brake shoe until friction material just be worn out. Like the front brake shoe for Jetta car.
When replace the shoe pads, must use special tools to brake pump back to the top, do not use a crowbar forced it back. It will be lead lead to brake clamp guide screw bending, so that the brake pad will stuck.
It is need run 200 kilo-meters to achieve the best braking effect, it's need be calful driving after replacing the brake shoe or pad.
After the replacement, be sure to step on the brakes a few, to remove the shoe and the brake disc gap, in case the brake not work at first brake to cause the accident.